So, shortly, I am building a new template with a couple of instances.
I am using the following technique:
1. Loading all instruments I tend to use in VEP
2. Purging instruments in Kontakt
3. Disabling instrument in VEP Instance
I noticed that, in an initial startup, RAM is fine...
if you are looking for a smart solution to speed up your composing workflow just check this review video done by composer Lorenzo Emanuel on the newly released product Flow2
Built with Cubase, Vienna Ensemble Pro and Open Stage Control
I just released a new version of Flow using Open Stage Control as a remote!
Flow2 is a commercial product, if you are interested you can check the page here www.artificialharmonics.com/flow
Currently 20% OFF till end of April with code FLOW2 as intro promotion
You can fully control...
Rebuilding my current template and trying to utilize the 8 MIDI ports available in VEP with Studio One 5.
Has anyone been able to successfully do this with Studio One? I can't seem to find how to access the outputs of Port 2 using the VEP Event Input plugin. I can't seem to be able to...
I am planning to move my current Cubase project to Logic and I wonder how to correctly handle articulation changes.
In Cubase I have a single VE Pro plugin, connected to a unique VE Pro server instance hosting about 70 VSL instruments.
Could you please tell me how should I...
I have a question as I couldn't find it anywhere on the web. I made a template in Studio one, routed with VEPro 7, 120 instruments split in 5 instances, so not that much.
Anyway, I wanted to speed up loading time so i disabled every kontakt instance in Vienna on startup. When i...
Need some help.
Since last fryday my system can't run VE PRO plugin.
The support won't help. very slow response and looks like no one there is working on my issue.
Can't someone point me to some direction?
This is the error that Logic print.
I tried latest elicenser install...
Here's a video on how to get started with Vep 7 if you've never used it before. Goes from downloading the free version of Vep 7 to installation to adding instruments within Vep 7 and playing them, outside of the Cubase daw. A video showing how to connect a slave laptop to Vep 7 will...
I know many of you use Vienna Ensemble Pro in your workstations and VEP allows you to network additional computers which allow you to use very large templates. But some who don't use Vienna Ensemble Pro may be unaware that using VEP7 on your workstation locally can be extremely...
I have been building an orchestral template using VEPro into Cubase (Nuendo actually). I have been building it with 2 outputs per Kontakt instrument, one for long articulations and another for short articulations so I can apply different processing to them within Nuendo.
I don't have many...
So in my current system I use Vienna Ensemble Pro (VEP) to host symphonic instruments on my 2 slave computers, and I also use a local instance of VEP to run my synth plugins (for when I'm working on film projects and i want to keep consistency with the sounds across cues).
I spent years developing work templates using Kontakt5.dll , but now since we upagraded to Kontakt6, does it worth it to re-create my old templates on Kontakt6?
if I don't what am I missing?
Do Kontakt6 has any structural features that I may not be aware of that will optimize the usage of...
I’m about buying a new laptop as, because of the virus situation, I won’t be home near my main computer (an iMac) for a good while and I need to work on a few projects (the only computer I took with me is a MBP end of 2013, only 8 Go of RAM).
Knowing for the last 10 years I have...
I recently introduced VEPro to my workflow on Cubase, and I have struggles regarding rendering my tracks/stems on Cubase to preparing them to the mixing stage, I tried the following.
1 - I tried the "Render in place" function, but it renders all the VEPro midi outputs so I end up with a...
I hope this is the right place to post this. My issue isn't with Kontakt per se, but it's the only place that seemed to specialize in scripting. This is an issue getting automation data to go to the correct place using Logic Pro, VEP, articulation sets, and logic scripting.
Hello, After I updated VEPro7 to 7.0.954, Cubase 10 is unable to recognize VEPro servers/instances. (locally)
However, if I open an old (Cubase+VEP) Template, the server is recognized and all seem okay at first, but If I want to create a new VEPro instance in Cubase, the server cannot be seen...
Hey guys, so when I run my Vienna ensemble pro 7 32 bit server, it does show up on my logic pro x. But, when I try to run 64 bit ver, it is not showing up on my logic. Can somebody help me out with this?:crying:
Massive permanent price drops on Vienna Suite, Vienna Suite Pro, and Vienna Software Package, plus up to 60% off these and Vienna Ensemble Pro, Vienna Symphonic Cube, select Vienna Special Editions, and select Synchron titles. For example, Vienna Suite Pro was previously $850 and is now on sale...
Hi - Can anyone help please?...
I'm experiencing hangs when using Kontakt 6.1.1 in Vienna Ensemble Pro 7 on Windows 10. (I'm connecting to VEPro from Cubase 10 or Nuendo 10.)
Memory use on the VEPro/Kontakt machine is 74GB out of 256GB and total CPU when connected is 30-40%. 24 instance tabs...
I'm halfway through building my first grand template on Vienna Ensemble Pro7 and Cubase10, but some concerns are arising.
I wonder what would be the ups and downs of having too many VEP instances vs too many Plugin Channels vs too many Midi channels coming from less Kontakt Instances...
I made a video for anyone thinking about upgrading to v7 before the intro sale ends (23rd is the last day). I am not affiliated with VSL, but I am VSL Certified. I thought it might help some people get a quick independent look at some of my favorite features of VEP7. Hope it helps.
Here is a summary of whats new and improved in VEP7:
1) New added fx plugins from the Vienna Suite Pro
Matrix Mixer Pro
Surround Balance Pro
Surround Pan Pro
Has anyone successfully integrated Vienna Ensemble Pro into FL Studio, getting it to perform live with no distortion and ALSO exporting to audio?
They seem notorious for not working well together, and for reference, there's an entire thread that has a fix for this here (HUGE help and thanks to...
Trying to find a solution for sending MIDI over network to VEP in standalone mode on Windows 10.
MIDIOverLAN used to be the way I did this, but it's discontinued. I own a couple version 2 licenses, but don't have an installer anymore. MusicLab won't provide me with one.
I just tried rtpMIDI...
I've searched older threads and haven't quite found what I'm looking for.
Does anyone have experience using a VEP with Dante? I run VEP on a master and two slaves, and if I knew with confidence that investing in Dante hardware would a. work well with VEP and Cubase, and b. help me keep latency...
Hello fellow VEPro6 folk,
Does anyone know of a way to setup a key command or macro in Cubase to Connect to an existing VEP6 instance that has already loaded on a slave ?
I have around 60+ instances, with instrument tracks already mapped in a Cubase template. What I want to do is either have...
I'm new to Logic (but not using DAWs) and have a couple of questions:
When I load a multi-plugin like Kontakt or Omnisphere in Logic and play one instrument on one channel on my keyboard, all the channels for that plugin light up in the mixer window, and in the tracks window. Is it really not...
Last year I started to build my orchestral template because I had so much sample libraries but I felt I had lost the control.
After one year of work and development I have finally released FLOW.
It offers a ready to use integration between
Vienna Ensemble Pro 6
I have a Mac Pro tower that I want to use as a master, and want to connect to a PC tower to be used as the slave, to use as master/slave for Vienna Ensemble Pro, and stream VST libraries from slave to master.
I have poor networking experience/knowledge, can anybody help me?
As in the title....given that I mainly work with:
- Lots of VSTs and Kontakt instances
-Lots of Orchestral Work
-Not so much audio recording
-A few plugins in the inserts, but the most of them would be used only in mixing/mastering phase, when I have already bounced all the VSTs tracks to audio...
UPDATE: It's taken a few months but I'm now announcing my YouTube channel as an active channel making videos daily. Steve Steele's YouTube channel https://www.youtube.com/user/TheSteveSteele, new unfinished website http://www.stevesteele.com recent VSL Certification and much more. (Dorico...
In this video I try to explain with simplistic words what is a DAW and the basic separation needed to have an efficient orchestral template.
The video is based on personal experience, showing what I have done to improve the performances of my DAW and how you could upgrade yours.
In this video I show in details the techniques I use to orchestrate and to create a sound which is (as much as I can today) closer to realism.
The composition is this one
Libraries used in this composition:
▸Cubase Pro 9.5
▸Spitfire EVO 4
▸Hans Zimmer Strings
▸Spitfire Chamber Strings...
as probably most of you I have been asking myself how I could have a huge orchestral template still using a PC with only 32 Gb of RAM.
Well the answer is Vienna Ensemble Pro disable feature.
I first discovered this feature and than I managed to create an orchestral template with about...
Am under pressure with a project and am suddenly getting problems with bouncing to disk in Digital Performer. Instruments cut out for a fraction of a second. I seem to get the beginning of notes; the dropouts occur after the onset of the note. Hard to know what in the chain might be causing...
I'm contemplating upgrading my VE Pro from 5 to 6. Time+Space happens to have a pretty good upgrade price right now - $78 (though it ends in only a few hours!). It sounds like version 6 allows for better organization, more customizing, and more efficient usage. I'm just wary of...
Long time lurker, first time poster here.
I've really hit a brick wall here, and would greatly appreciate any help.
I've searched and read all about potential similar issues, but have come up shorthanded, despite learning a lot of new things along the way. So..please bear with me.
I'm having a tough time with the following scenario. So recently I upgraded my main DAW with 2 SSDs and I tried a few play v5 libraries in them. They're freaking fast. No contest. My slave is now a dinosaur.
BUT all my VE Pro projects reference v4 on my slave. It says "missing plugin" in my...
I'm in the process of building a VE Pro 6 template. My current main DAW is Digital Performer, but I also want to be able to use it with Cubase. For this reason, I am using VST Kontakt instances (virtually all of my libraries are Kontakt, with the exception of Omnisphere and some EW...
While turning another PC into a VE Pro slave machine, I've noticed that I have peculiarly high CPU usage on one thread, even when no instances are actually connected to the master.
12-core/24-thread Intel Xeon CPU
2x SSDs (1 OS drive; 1 samples drive)
When I load a project, Vienna Ensemble Pro could not load the updated SynthMaster 2.8.2 plugin:
Errors occurred while loading plugins:
AU: KV331Audio| SynthMaster 2.7 Instrument (Could not create plugin)
I tried with my Logic X project and a lone vframe save file.
I can assign...
Today, I encountered a very odd issue when loading my metaframe in VEPRO: After having successfully loaded the same metaframe just an hour earlier, I relaunched my metaframe, only to find that the content file paths for a small handful of instruments...
Hello everyone! :)
As the title says I'm wondering were the "purge all instances of Kontakt"-button is?
If you like me have a big VEPRO template that is being modified slightly almost daily, the frustration of having to go through about 1000 tracks (some of you might have much more) just to...
NEW FROM STUDIO SPOTLIGHT
In Studio Spotlight's first video, we look at the recently released Vienna Ensemble Pro 6, comparing the load times of a string section from EastWest's Hollywood Orchestra Gold with...
It's nice that DP9.1 and VEP6 came out at the same time. Both are really good and stable. I ran them hard together for 24 hours straight and not a single crash. So I made a video about starting from scratch with an empty DP document. I set everything up, wrote about 20 bars of orchestral music...
Now this little announcement at bestservice.de took me by surprise just now...
Did anyone know about this? Is this serious?
What is version 6 going to be like in terms of new features? AU3 support?