1. S

    Lemur - Triggering mute/solo and vice versa

    Hi, Anyone here have a lemur example of simple muting and soloing tracks in cubase? I'm just starting with Lemur and have no scripting knowledge. I made some mute and solo buttons, they work a bit clumsy. I want them to behave just like in Cubase, pressing mute disables solo and the otherway...
  2. tapewtelve

    Lemur independant clocks

    Hi all. Ive a problem with the clocks in lemur. When i have 2 stepnote sequencers set to separate clocks (0 and 1) and start the clock0 one, it starts both sequencers, and when i try to start clock1, nothing happens. Its as if only clock0 works, and the rest all slave to it. Is there something...
  3. S

    Lemur - Trying to use time variable - What's Modulo ?

    Hello I'm trying to figure out how does "time" variable run, in order to make a more "living" interface (for example, showing up a container coming from the left to the right... Is that possible ?...)... So, the manual says as an example : Seconds=floor(time%60) And my question is : what does...
  4. S

    Lemur - how to script in order to use a fader to change midi port of a multiswitches ?...

    Hello, I'm trying now to change the midi port of a multiswitches (8 switches), using a fader... This multi is meant to send note on (pitch from 0 to 7) to cubase, in mackie mode, to control the Rec button. I have a Fader which changes the value i use for Midi Target (value named 'PortMackie')...
  5. S

    Lemur - What's wrong with my small piece of code ?...

    Hello, I'd like to control the midi message sent by a fader, with one switch. I know how to make when it's about sending only midi CC... but... I want this : - if my switch is on 0 --> fader control PitchBend on midi port 4 (Mackie in Cubase). - if my switch is on 1 --> fader sends cc out, to...
  6. Steve Wheeler

    Does Cubase output OSC messages?

    Have searched for a bit both in manual, here on VI Control, and via internet search with no luck. Anyone know if Cubase will output OSC messages? I've tried to get this to work in Cubase with no luck. I got it working with OSCulator and Lemur in Logic where the OSC data would populate...
  7. Skyroads

    Cubase 11 - Lemur connection

    Hi folks, For 3 days now I've been trying to get it work but only with partial success. While the Generic Remote for visibility and general Cubase controls (modwheel, play, record, save, export etc.) works perfectly fine, there are always problems when returning data to Lemur. I have adjusted...
  8. A

    Lemur Scripting

    Hey guys,, Is it possible to script in Lemur switches that when you press one of them the others turns off? for example if I have 5 switches I want it to enable only the one I press on (only 1 out of 5 is pressed each time) Thanks!!
  9. G

    Here is Composer Bridge - a Lemur powered touch interface for Digital Performer (for now).

    Hi everyone, I am very keen knowing what you think of this touch interface I created on Lemur to control my template on Digital Performer and Vienna Ensemble Pro. I am not planning to distribute it at the moment but I might change my mind if I see enough interest around it. Also, in that case...
  10. M

    Spitfire UACC & KS Lemur Template, SCS, SSS and Hans Zimmer Strings

    A little project I’ve been working on... a new UACC and Keyswitch Template for Lemur. • Spitfire Chamber Strings (By Default set to UACC) • Symphonic String work by default as UACC. (By Default set to UACC) • Hans Zimmer Strings (By Default set to Keyswitch) There is also a page dedicated to...
  11. bengoss

    Cubase Tempo Tap - Lemur??

    Hi guys, Is there any way to make a macro for a tempo tap and integrated in Lemur? Thanks, Ben
  12. Audio Birdi

    Acer T232HL Touch Monitor, Tannoy Reveal 601a Monitors, Saffire Pro 24 + Syba PCI-e FW Card (UK)

    Hi all, These items are all based in the UK. I have the following for sale: Tannoy Reveal 601a Studio Monitor - x3 - sealed £100 each Acer T232HL Touch Monitor w/ aftermarket stand for any angle usage £200 Focusrite Saffire Pro 24 Audio Interface + Syba SD-PEX30009 Firewire PCI-e card £150...
  13. Jaredf920

    Logic - static control for a track

    In Logic: Is there a way to map a controller to only and always control volume of a specific track? I have a Dialog track an temp music track (audio inputs from my video slave) and I want to map a fader/knob/something to always only control volume of each of those tracks. All of the...
  14. R

    Issues running Lemur on MacOS Mojave with Cubase

    Curious if anyone here has managed to get Lemur working on MacOS Mojave (10.14.2)? Daemon and Lemur editor are frozen on Mojave making connectivity to my DAW impossible, and they're obviously in need of an update. Unfortunately, Liine's customer service is a little slow to say the least. It...
  15. jpb007.uk

    How to setup Lemur to recognize Cubase Midi Mixer data

    Hi there fellow VI'ers, I hope you may be able to help. I've been trying to figure out how to get Lemur to capture MIDI IN data from Cubase 9.5 What I want to do is, use the Cubase feature of sending a track number to Lemur, and then also a unique number that I can use in Lemur to display a set...
  16. quickbrownf0x

    Lemur - looping through objects

    Hey guys, Does anyone know how to loop trough a list/tree of objects in Lemur script? Pretty basic stuff normally, but Lemur is giving me grief. Here's a simple single-level loop (I want to expand it later so it can handle any level); decl parent_object = findobject('INSTRUMENT_BANK'); decl...
  17. quickbrownf0x

    Liine Lemur (for Android) - creating objects on-the-fly

    I'm wondering if it's possible to dynamically create and render an object, like a Monitor or Container by triggering a (global) function/bit of script. Like so; decl contain_obj = new Container();// create the object setattribute(contain_obj, 'rect', {0,0,640,480}); // set its dimensions and...
  18. marcodistefano

    FLOW Ready to use integration Cubase-Vienna-Lemur-Spitfire Audio(and more)

    Hi guys, Last year I started to build my orchestral template because I had so much sample libraries but I felt I had lost the control. After one year of work and development I have finally released FLOW. It offers a ready to use integration between Cubase Vienna Ensemble Pro 6 Lemur Almost all...
  19. Skyroads

    Articulation switch in lemur (cubase) - need help

    Hey guys I've roughly set up my full orchestral template in Cubase with Vepro 6 and Lemur. It is all working not too bad, while I still have to get the levels and balances right. Unfortunately there is one thing that doesn't seem to work right. In Lemur I set all articulations up which...
  20. J

    What setup do I need for Lemur and PC/Cubase

    A little late to the Lemur touchscreen game. I haven't updated my template/workflow in years. Hard to switch my brain from creative to technical. I bought 2 Stream Decks as I like real buttons better than touch screens. They are awesome, but when I click/highlight a VE Pro window, the...
  21. RoyBatty

    Lemur in-app editor crashes when typing single or double quote

    I was wondering if any Lemur users have had the issue below occur to them. When I am using the Lemur in-app editor, the application crashes or exits out of the script editor whenever I type a single or double quote. This makes scripting useless outside of simple number manipulation for x...
  22. Flycrazy

    Lemur midi_args

    Hi Folks. MIDI_ARGS is an array. It represents: Message type, Midi Target, Midi channel in Lemur. In this case is message type a hex value or a decimal value? P.e.: {1,1,0) What does this mean? Thank you so much. Flycrazy
  23. marcodistefano

    Sharing my Lemur project for orchestral template and expression maps Spitfire Audio

    Hi guys, many of you asked me if I could share my lemur project so here it is. This is built on top of the one initially shared by @Mihkel Zilmer where I have added more tabs, functionalities and expression maps. Basically it is done to work with spitfire audio libraries. This is the video...
  24. Manaberry

    Open Stage Control (Tutorial) - An alternative to Lemur and TouchOSC

    Hi everyone! I've been using Open Stage Control for almost two years now (jeez, time flies). This application really improved my workflow as a composer. It’s an alternative to Lemur/TouchOSC. This is a free software developed by Jean-Emmanuel, available on Windows, OSX, Linux. It's quite a long...
  25. marcodistefano

    Behind the scene - Realistic orchestral sound with spitfire audio

    Hi All, In this video I show in details the techniques I use to orchestrate and to create a sound which is (as much as I can today) closer to realism. The composition is this one Libraries used in this composition: ▸Cubase Pro 9.5 ▸Spitfire EVO 4 ▸Hans Zimmer Strings ▸Spitfire Chamber Strings...
  26. marcodistefano

    Huge Orchestral Template with only 32 Gb of Ram

    Hi all, as probably most of you I have been asking myself how I could have a huge orchestral template still using a PC with only 32 Gb of RAM. Well the answer is Vienna Ensemble Pro disable feature. I first discovered this feature and than I managed to create an orchestral template with about...
  27. stigc56

    Lemur to control Berlin Brass

    Hi I'm struggling a bit with Lemur and Berlin Brass. I want to create a controller that will allow me to control the volume and pan of the different mikes in Trumpet 1 Capsule. My Berlin Brass is loaded in VEPro 6 and the instrument occupy 4 slots. The first slot in Kontakt is the legato patch...
  28. marcodistefano

    Lemur: How to change with scripting midi controller & channel

    Hi all, I have a template where I have only one switch button set to controller change I would like to be able to change within a script the controller and channel that this switch send any of you know if possible? Thanks in advance
  29. DanielBrunelle

    Lemur Forum Dead?

    Hey guys, Does anyone know whats going on at liine? The Lemur forums arent accessible to me. https://forum.liine.net/ Maybe lemur has been a zombie for years but losing the forums is still a huge blow! Im pretty committed to the touch screen interface and lemur's very powerful tools for...
  30. marcodistefano

    My Orchestral Template: Cubase, Lemur, VePro and Spitfire Audio

    Hello everyone, I spent the last couple of weeks creating my first orchestral template having in mind the following drivers: I want all the instruments ready for recording I have only 32 Gb of Ram I want to be able to scale complexity and focus on specific tracks I want to access easily VST...
  31. adam_lukas

    Cubase iC Pro VS Lemur - Best solution for Touchscreen?

    Hi guys! Finally ordered an iPad to control my DAW, Cubase. There are a ton of tutorials how to do this with Lemur at the time being - to me it looks rather time consuming and complicated compared to Steiberg's inhouse app iC Pro. (which does not seem to be hyped as much as Lemur) Has...
  32. B

    Offering a custom Lemur setup for Cubase for free (as my thesis)

    Hi, For some time I have been thinking of making a Lemur-based controller setup for Cubase with MIDI-editing and visibility etc. but I never seem to have enough time for a full-blown solution and I start doing some quick ad hoc stuff instead, which never really leads to anywhere I should also...
  33. MIDI Kinetics

    Composer Tools Pro v1.1.9: Auto-Recall on Track Selection

    New in Composer Tools Pro v1.1.9, click on a MIDI track in Cubase and Composer Tools Pro will automatically sync up to your selection. Currently this is only available in Cubase. Find out more about the ultimate virtual instrument controller for Lemur! https://www.midikinetics.com/
  34. MIDI Kinetics

    The Correct Way to Set Up the iConnectMIDI4+

    It's a great piece of gear, but the iConfig software can be confusing. Hope this helps someone. https://www.midikinetics.com/how-to-set-up-the-iconnectmidi4/
  35. SomeGuy

    Did a control surface really speed up your workflow?

    I was looking at adding a control surface for controlling Cubase and plugins more quickly. However, I use Vienna Ensemble pro and try to load as many instruments and insert effects inside VE pro on both my PC slave and main Mac system. Will systems like the Nektar Panorama (who have pre-mapped...
  36. K

    IconnectMIDI2+ with Android

    Hello, I was wondering if anyone has tried using the iconnectMIDI2+ with an android device. I'm thinking about using it to connect my Galaxy View 18.5 to my mac pro to use Lemur. I haven't had any luck with Ad Hoc networks. The mac pro recognizes que tablet if I use a USB cable and a USB...
  37. K

    Lemur layout in Pro Tools

    Hello, Was just wondering if anyone has successfully managed to create a Lemur project to control audio faders inside of Pro Tools. I currently have a layout for Cubase that I use everyday, but since Pro Tools does't have Generic Remotes like Cubase (that I know of at least) I'm not entirely...
  38. rgames

    [VIDEO] Controlling Cubase Track Visibility Using Lemur

    I added a tablet to my workflow a couple months ago and decided to put together a tutorial on how to use Lemur to control track visibility in Cubase. The Lemur piece is actually very easy - the trick was getting the logical editor presets, macros and generic remote set up correctly in Cubase...
  39. rgames

    Tutorial: Auto-Select Keyswitches in Lemur When Changing Tracks in Cubase

    To be continued...!!!
  40. dtonthept

    Anyone using a Galaxy 12.2 tablet (or similar) for Lemur / OSC?

    Hi folks, I'm looking at expanding my touchscreen control in the studio, and am weighing up going for a bigger tablet as opposed to a multiplying posse of iPads. Definitely not interested in the iPad Pro, but I've seen the 12.2" Galazy going for around $500 which makes it a contender for me...
  41. buschmann

    Lemur iOS/TouchOSC and Eastwest

    Hi guys, I'm wondering if anybody out there has used either Lemur iOS or TouchOSC (i have both) to control keyswitches with Eastwest? I know there are several tools out there that could help the process: A.G Logic Toolkit, Art Conductor and SkiSwitcher all comes to mind, though i dont own any...
  42. jonathanwright

    UACC, Expression Maps and TouchOSC conflict?

    Hey all, I've just completed setting up a Spitfire only template with the articulations controlled by UACC. I'm using the UACC Expression Maps provided by Spitfire which work great, but when I try to use Blake's UACC TouchOSC template it seems the Expression Map is 'blocking' the messages...
Top Bottom